PlantForce: bingham

HOME	ABOUT US	CONTACT US	DISTRIBUTORS	DOWNLOADS

EXCAVATOR BUCKETS	QUICK HITCH	LOADER BUCKETS	AUGERS	PALLET FORKS	BRUSH BUCKETS	FORK & GRAPPLE	RAKE

COMPACTOR PLATES

Specifications	DC 8000	DC 8000	DC 8000	DC 8000	DC 8000	DC 8000
Width (mm)	1750	1850	1950	2060	2135	2290
Vertical force (ibs)	8000	8000	8000	8000	8000	8000
Frequency (vpm)	2300	2300	2300	2300	2300	2300
Hydraulic flow (ltr)	62	62	62	62	62	62
Operating pressure (psi)	1500	1500	1500	1500	1500	1500
Base Plate Dimension	1750x450	1850x450	1950x450	2060x450	2135x450	2290x450
Approx shipping weight (kg)	400	410	420	432	443	465

ROAD PLANERS
*Centre pivot design* Planer performance is greatly improved with the centre pivot design, which puts the force of the skid steer directly over the cutting drum. This eliminates stress on the planer frame and the "instability and bouncing" experienced with the rear pivot or top pivot products currently on the market. This feature greatly increases productivity and stability in your most difficult planning operations such as dense packed asphalt or concrete.

ROAD PLANERS

Centre pivot design

Planer performance is greatly improved with the centre pivot design, which puts the force of the skid steer directly over the cutting drum. This eliminates stress on the planer frame and the "instability and bouncing" experienced with the rear pivot or top pivot products currently on the market. This feature greatly increases productivity and stability in your most difficult planning operations such as dense packed asphalt or concrete.

	PATCH PLANERS
	Hydraulic power adjust depth control The patented power adjust depth control utilises the bucket function of your skid steer to adjust the depth of cut to the planer. This simple to use method allows the operator to keep his hands on the controls at all times and give precise control of the planning operation.

PATCH PLANERS

Hydraulic power adjust depth control

The patented power adjust depth control utilises the bucket function of your skid steer to adjust the depth of cut to the planer. This simple to use method allows the operator to keep his hands on the controls at all times and give precise control of the planning operation.

BACKHOE PLANERS
The CAS 400 and 450 are available to fit most back hoe loaders, a typical high flow circuit is required. The planer is operated by extending the back hoe arm and drawing the planer towards the host machine. This unit is ideal for planning either horizontally or on inclines. The cassette style of the motor mounts keeps the unit width to a minimum, allowing improved access to confined areas.

BACKHOE PLANERS

The CAS 400 and 450 are available to fit most back hoe loaders, a typical high flow circuit is required.

The planer is operated by extending the back hoe arm and drawing the planer towards the host machine. This unit is ideal for planning either horizontally or on inclines.

The cassette style of the motor mounts keeps the unit width to a minimum, allowing improved access to confined areas.

	SLOT CUTTER
	The patented roll-in depth control allows the operator to easily change the depth of cut without removing his hands from the controls. The operator controls the depth utilising the skid steer's existing bucket function. These motors deliver the power directly to the cutting disc. No power is lost through a planetary reduction system. A wide selection of motors are available to maximise the productivity of your skid steer.

SLOT CUTTER

The patented roll-in depth control allows the operator to easily change the depth of cut without removing his hands from the controls. The operator controls the depth utilising the skid steer's existing bucket function.

These motors deliver the power directly to the cutting disc. No power is lost through a planetary reduction system. A wide selection of motors are available to maximise the productivity of your skid steer.

	STUMP GRINDER
	The BSC480 has been developed to optimise the stump cutting ability of your 2.5 - 8.0 ton Mini Digger or Backhoe Loader (Patented Offset Design). With its integrated hydraulic controls, maximum utilisation of the host machine's power output can be achieved. The design of the BSC480 allows positioning and working in remote locations which conventional stump cutters would not reach.The concept of the BSC480 permits the operator to position the cutter in some of the most difficult positions, yet still achieve unparalleled stability by using the host machine as a stabiliser. This high level of stability permits a safe smooth cutting operation. Joystick control allows operation of the BSC480, from either within the cab or externally using the flexi control lead. (Flexi control lead may require a second operator).

STUMP GRINDER

The BSC480 has been developed to optimise the stump cutting ability of your 2.5 - 8.0 ton Mini Digger or Backhoe Loader (Patented Offset Design).

With its integrated hydraulic controls, maximum utilisation of the host machine's power output can be achieved. The design of the BSC480 allows positioning and working in remote locations which conventional stump cutters would not reach.The concept of the BSC480 permits the operator to position the cutter in some of the most difficult positions, yet still achieve unparalleled stability by using the host machine as a stabiliser. This high level of stability permits a safe smooth cutting operation.

Joystick control allows operation of the BSC480, from either within the cab or externally using the flexi control lead. (Flexi control lead may require a second operator).